AK...Series Air Damper Actuator

AK...--A...

Output torque：4 N.m/6 N.m/10 N.m

16 N.m/25 N.m/40 N.m

Waterproof lever: IP54
Ambient conditions ：-10...+55℃, 0...90% RH

Output angle ：90° (95° Max)

Noise max ：40dB(A)

Message Email

Description

The air damper actuator is suitable for circular spindle with 10 -18mm, or square spindle size 6 -12mm( or square spindle size 8 -14mm )

length>40mm, and the rotation direction can be reversed by pushing theCCW/CW switch side of the case. To change the

input/output signal valve, openthe case, and find the JP plug on the PCB. The control signal valve can be changedby

connecting the plug.

Output torque Actuator	Voltage	Control type & Model code
4N.m / 6N.m / 10N.m	AC 230V or AC/DC 24V	on-off ( AK...-D..series) 0(2)-10v or 0(4)-20mA ( AK...-A...series)
16N.m / 25N.m / 40N.m	AC 230V or AC/DC 24V

WARNING

1. Intallaion are for use by qualifed personnel only.To avoid injury and electric shock, do not perform any servicing other than that contained in this

manual.

2. All actuators are shipped from the factory ready

for installation;no electrical adjustments are required before placing them in operation.

3.Check the connections before energizing the power supply since wrong connections can damage the equipment.

4.The actuator should be stored in its shipping carton in a clean, dry area.

Dimension and Wiring

Relate Products