Power supply: 220V +/- 10% 50Hz～60Hz
Power: <6.5W
Pressure: 1.6MPA
Valve Action time:open time ≤ 13s closing time ≤ 7s
Working Circumstance:Air temperature: 5～40℃ Pipe water fluxion temperature: 5～90℃
Port size：3/4”（20mm）
KV Value：3.4（4.0）
Close P△ Mpa：0.20
This series of Motor Valve is used for the control of the ends of center A/C. Thermostat control the motor of the Valve, and make on/off through speed-down machine and reset spring to carry out the break/on of the hot/cold water in the pipe.
Instruction of operation and Installation
1.Feed line and return pipe of differential pressure should be controlled within the range allowed pressure difference.
2.The valve should be installed somewhere easy to install and maintain.
3.Horizontal installation, that’s mean the motor should be in the above of valve body to avoid humidity.
4.When install 3 way valve, infall is on the bottom of valve (no signal showed)
